What’re iron-on-transfers.com’s decals different from others’

Make clear stickers for your next big company event, to promote your latest product, to stick around the office, stick on cars, or just for fun! If you’re in a band, make band stickers, and use them to promote your upcoming album or tour. For easy promotion, include bumper stickers, or stickers for free giveaways to fans. Use stickers to stick on free gifts for clients, for company events, to promote your latest product, or to promote sales.

With our high quality, glossy vinyl material, they will stick strong on most material, and apply smoothly. With using white ink, our clear stickers will have that extra pop to your images. You can make them just about any shape, from round stickers, to heart shaped, or have them die cut to the image. When it comes time to change your stickers, they will come off clean leaving no messy residue behind to harm your products.

How to Make a 80s Style Tee Shirt

Cut up an old tee shirt to look like you just stepped out of the 80s!

First, the Neck : Mark 2–3 inches (5.1–7.6 cm) from the neckline all around the neck, following its natural shape.iron on transfers for t shirts

With sharp scissors, follow the basic neckline shape and cut a new, larger hole, using your marks and guidelines. (Remember to cut on the outside of your marks so those don’t remain on the shirt)

Next, the Sleeves : Fold the shirt perfectly in half, matching up the sleeve stitching both on top and bottom.

Holding both sleeves together, follow the angle of the sleeve edge, cutting off 2–4 inches (5.1–10.2 cm), depending on desired sleeve length.

Finally, the details : For a short shirt, in true “Flash Dance” style, feel free to cut an additional 6–8 inches (15.2–20.3 cm) off the length of the tee OR…

Instead of making it short, create some custom fringe. Lay the shirt out perfectly flat. Cut the side of the tee up each edge, stopping where the sleeve meets the body of the tee. Biker Flames iron on decals

Then snip small 2″ cuts (about 0.5″ apart from each other) down both the front and back of each side edge. Make sure there are the same number of snips on each side.

Tie the pieces together to create a side fringe on the shirt. Now repeat on the other side.

Now ROCK ON in your totally rad custom 80s-tee-shirts

Warnings

  • Make sure not to cut too much up the shirt to the sleeve, because the shirt will rip if you do so.
  • Be careful with scissors!

Things You’ll Need

  • A ruler

  • A silver Sharpie or chalk

  • Sharp scissors

  • Your Journey album

  • An oversized shirt (especially if you do the fringe because you will be taking in the waist at least four inches)

How to Get the Sticker Remains off Valuable Products

Some products that you buy may have stickers on them which leave sticky remains that are very hard to get off. This article shows you ways to remove the remains off such products without damaging them.

Method 1. Glass

1. Soak the remains of the sticker with rubbing alcohol.

2. Use the sharp edge of a razor blade to scrape off the remains; this will not damage the glass.

3. Make sure the blade isn’t pointing directly towards the glass. It should be facing the remains and should just skim the surface of it. If it gets harder to scrape off, add warmer water.

Method 2. Wood

1. Put hot water on a sponge.

2. Dab the sponge on the the remains of the sticker on the wood.

3. Slowly peel off as you would with a sticker. It will be easier than using cold water.

4. Consider using a towel to rub it off but it depends on the wood type. If it is smooth, the towel will work better than peeling it off.

Method 3. Metal

1. Use very hot water on the remains. Let it set for about 3 minutes.custom NHL decals stickers

2. Get a towel and rub the remains off hard. The harder you rub the remains, the more effective it will be.

3. Confirm that you are doing it correctly by checking if you get small rolls of sticker.

Method 4. Plastic

1. use rubbing alcohol and do basically what you would do with glass but be more gentle.

Tips

  • WD-40 sprayed on and left to sit will melt most glues. If not, try GooGone from the dollar store or a hardware store.
  • Boiling water can be dangerous, but its more effective.custom mlb stickers

Warnings

  • All three methods can cause injury if care is not taken, so be vigilant. Keep your fingers out of the way of the razor blade.
  • Do not try using hot water on glass.
  • The glass does not class as a laptop screen. A related wikihow has been added to tell you how to clean a laptop screen.

    Things You’ll Need

    • Razor blade

    • Warm water

    • Hot water

    • Towel

How to Print Out Large Letters of the Alphabet

    One of the most classic classroom decorations is an alphabet, strategically placed so students can refer to it when working and serve as a visual reminder of what they’ve learned. You can make a large format alphabet decoration inexpensively and easily by printing out large letters using your computer and printer. There are numerous websites that offer large format letters that can be downloaded and printed, or you can design the letters yourself using word processing software. Remember you can get creative with fonts and colors to help catch your students’ interests as well.custom mlb stickers

    • Open up a blank document using word processing software on your computer. Type the first letter you wish to create in the first line of the document.

    • Highlight the letter you just typed and go up to the “Font Size” drop down menu, usually located at the top center of the document window. Select the largest font size available and click it. If the largest size available does not sufficiently enlarge the letter, you can type in a larger number into the “Font Size” drop down menu box.

    • Highlight your letter again and select the “Font” drop down menu if you wish to use a particular font for your letter. Select your desired font out of the available options.custom NHL decals stickers

    • Go to the “File” drop down menu and select “Print Preview” to see if your letter looks as you want it to. Check that it is appropriately aligned on the paper and does not overlap the boundaries of the paper size.

    • Navigate to a website if you choose not to make your own alphabet. Many sites offer large format letters for printing. Select the first letter you wish to print. Open the letter in a new browser window, or download it to your desktop and open it using the appropriate software (generally, either word processing software or a .pdf reader).

    • Select the “File” drop down menu and click the “Print” option on either your web browser or word processing software.

    • Check that there is paper loaded into your printer and that it is plugged in and communicating with your computer. Click the “Print” button in your web browser or word processing software and monitor the printer as it prints the letter out.

How to Make Winter Window Decorations

Winter decorations cheer up drab windows, and make them look pretty and frosted during the cold dull months.

1. Go to your local craft store and purchase plain white card, silver paper, silver and gold glitter glue, PVA glue, double side sticky plastic, a small paint brush, cheap silver and gold baubles, thin gold or silver ribbon, tinsel, and some window snow spray. You could also buy or find some clear fairy lights.

2. Take some white card, and lightly draw an outline of a snowman on it. Don’t pencil in any features. Cut it out.

Make Winter Window Decorations v2

3. Carefully draw in the features, such as a scarf, eyes, nose etc using gold and silver glitter glue. Place on some newspaper and allow to dry for a few hours. custom NHL decals stickers

Make Winter Window Decorations v3

4. String up the fairy lights in the window you’re decorating.

Make Winter Window Decorations v4

5. Spray window snow in the corners of the window for a frosted affect. Pin up the curtains and pull up the blinds beforehand to avoid any damage to them.

Make Winter Window Decorations v5

6. Thread the ribbon through the tops of the baubles, and string them up at different levels in the window.

7. Draw some stars onto the silver paper.custom mlb stickers They don’t all have to be the same size. Cut them out carefully.

Make Winter Window Decorations v7

8. Cut some small squares of double sticky plastic, and peel it. Apply three pieces to the front of each star point. Stick them in the window.

Make Winter Window Decorations v8

9. When the snowmen are dry, cut and peel some small squares of sticky plastic and apply to the front of them, one piece at the top and one at the bottom. Stick them in the window.

Make Winter Window Decorations v9

10. Blu-tack a long straight piece of tinsel onto the top of the window, and again at the bottom.

Make Winter Window Decorations v10

Things You’ll Need

  • Plain white card

  • Silver paper

  • Silver and gold glitter glue

  • PVA glue

  • Double side sticky plastic

  • A small paint brush

  • Silver baubles

  • Scissors

  • Thin gold or silver ribbon.

  • Window snow spray

  • Tinsel

How to Make an Applique

Appliques are the perfect way to jazz up plain articles of clothing, or make old clothes into something fresh and fun. They can also be used to make personalized gifts like t-shirts, tote bags, or caps for friends or loved ones. You can make an applique out of any design you can think up, so the sky’s the limit! Read on to learn how to create and apply appliques.

Part 1. Make the Applique.iron on NHL Embroidered Patches

1. Choose a design and fabric. If this is your first time making an applique, you may want to go with a simple design, like a heart, a star, or a bird – objects with clearly defined and recognizable silhouettes.

  • Do an online search for “applique designs” if you’d like to see a wide range of ideas that have worked for other crafters. If you find one you love, print it out so you can trace it later.
  • Keep in mind that you’ll be sewing around the edges of your applique when you apply it to your chosen article of clothing. Simpler geometric shapes will be easier to sew around than trees with many branches, or the skyline of a city. Go with what works for your skill level.
  • Think about what type of fabric fits both your design and the article you’ll be enhancing with your applique. Make a choice based on color and style. Fabrics made of light cotton or muslin work well. iron on transfers for t shirts
  • If you’re feeling bold, choose a multi-layered design and more than one fabric. For example, you could create a black bird with red-tipped wings, or a white crescent moon with a yellow star.

2. Draw or trace your design on a piece of paper. You’ll be using your drawing as a pattern, so take a pencil and use clear, thick strokes that are easy to cut out. When your design is finished, carefully cut it out using a pair of scissors.

    • If your design includes letters or another asymmetrical shape that should be pointing in a certain direction, draw or trace its mirror image onto the paper. The shapes will be pointing in the correct direction on your finished piece.

    3. Trace your pattern onto iron-on interfacing, or fusible webbing. Make sure you trace on smooth side of the iron-on interfacing, since the side with glue is more difficult to work with. When you’re finished tracing your design, cut it out of the interfacing using a pair of scissors.

    • For this step, it’s important to use a fabric pen or a different pen with ink that won’t bleed to prevent getting spots and stains on your finished piece.
    • Iron-on interfacing is available at fabric stores. Try to find one with paper backing that can be peeled away – this will help when it comes time to attach your applique to your article of clothing.

    4. Iron the interfacing onto the “wrong” side of your fabric. Turn the fabric over so that the right side is facing down. Place your iron-on interfacing cutouts glue side down on the fabric and carefully run an iron set on the “silk” setting over them until they are fused with the fabric.

    • Make sure the steam setting on your iron is off, since the moisture might affect the shape of your interfacing.

    5. Use a pair of fabric scissors to cut your design out of the fabric. Your applique is now ready to be attached to your piece.

    Part 2. Attach the Applique

    1. Prepare the underlying fabric for the applique. Make sure the underlying fabric is clean and pressed. If you’re working with cotton or another shrinkable fabric, run it through the washer and dryer in preparation for the applique.

    2. Position the applique on the underlying fabric. Do you want your applique to be centered, or offset? Try different arrangements to figure out what effect you like best.

    • If your iron-on interfacing has a removable paper backing, go ahead and remove the paper and stick your design where you want it to go on the fabric.
    • If your iron-on interfacing does not have adhesive backing, position your design and use a few straight pins to keep it in place.
    • Make sure your design and the underlying fabric are flat and free of wrinkles.

    3. Sew the applique to the underlying fabric. Use a sewing machine to stitch around the perimeter of your design, gently guiding the fabric through the machine and pivoting when you come to a corner.

    • When you’ve stitched around the entire perimeter, stitch a few centimeters over the place where you started, then do a backstitch to finish it off. Turn the fabric over and clip the threads.
    • The settings on your sewing machine determine the length and width of your stitches. Use bigger or smaller stitches depending on what you want the finished piece to look like.
    • If you have more than one piece in your applique, stitch the bottom layer first, then position and stitch the second layer, and so on. Consider using contrasting threads for the different layers and fabrics.

    4. Tidy up the finished piece. Trim loose threads from the back of the applique. Iron the shirt, bag, or blanket you just appliqued for the finishing touch.

    • Consider adding a few decorative touches, such as buttons, bows, or sequins.

    5. Finished.

    Tips

    • The fabric you choose for your applique should not be heavier than the underlying fabric.
    • Appliques are handy for covering holes or stains in old clothes.

    Things You’ll Need

    • Paper

    • Pencil

    • Fabric Scissors

    • Fabric pen

    • Iron-on interfacing/fusible webbing

    • Iron

    • Applique fabric

    • Underlying fabric (a t-shirt, a tote bag, a blanket, etc.)

    • A sewing machine or a needle and thread

    • Straight pins

How to Decorate Your Bedroom Wall Cheap

Got a shabby bedroom wall? Depressed every time you lie back and look up? Whether it’s a bad paint job, color choice, or simply a case of too boring, you can decorate your four walls easily and cheaply.  Read on…custom NHL decals stickers

1. If you dislike the paint or wallpaper, get rid of it. Wallpaper can be removed with a scalpel. Painting over a bad color with plain white or cream is always a life saver. Make sure you do this properly and plaster the sideboards before starting.

2. Clean up. You may have stains and dirt on your walls. Get rid of them as soon as possible, as a clean wall is a pretty wall! A sponge and a quality cleaner usually takes good care of stains – if not, try something a little stronger or see if you can redo the paint in that particular area.

3. Get some posters. You can find them in all kinds of magazines, or if you are willing to spend a tiny bit more, try shopping around. Make sure to use blue tack, as this doesn’t damage paint jobs and is easy to remove.

4. Hang up a picture or two. If you’ve got artwork hanging around, stick it in an attractive frame and hang it up on display. You can do the same with photos, collages, anything really. A frame is all you need.

Tips

  • There are poster books available from news agencies, very cheap and complete stocked with all kinds of posters which you can buy.
  • If you want to, you can have a certain wall and just make it your own, decorate with pictures,etc. custom mlb stickers
  • You can try doing something unique and painting patterns rather than solid colors if you want something more outrageous.
  • If you live with someone else or the place isn’t yours, always ask permission before making any major changes like paint or wallpaper.
  • Try to pick a certain theme to stick with for a more coordinated look.

Warnings

  • Sticky tape can damage walls and is difficult to remove, so always use blue tack.
  • Be careful that the cleaners you use are safe on paint.

How to Decorate Your Notebook

Crepe-paper streamers are inexpensive party decorations that give big visual impact. With nothing but a roll of streamers, scissors, tape and a handful of thumbtacks, you can turn almost any get-together into a festive gathering. Best of all, streamers are also fairly easy to clean up, and as long as they don’t rip, you can re-use them many times over. Ultimately, decorating with streamers is all about expressing your own creativity in strips of crepe paper.NBA wall decals

Method 1. Criss-Cross

1. Tape, thumbtack or staple one end of a streamer to a corner of the ceiling.

2. Grasp the other end of the streamer and twist gently.

  • Don’t twist it so tightly that it crinkles up or becomes stiff.

3. Attach the other end of the streamer in the middle of the room, or around a ceiling fixture you’d like to highlight. Leave enough slack in the streamer for it to drape gracefully.

4. Continue attaching streamers in the corners or sides of the room, then gathering them all in the middle.

Method 2. The Curtain

1. Tape floor-length streamers side-by-side to the top of a doorway.iron the transfers

This creates a similar effect to a beaded curtain, and is a great way to set up a surprise party or to partition off certain areas without using a solid barrier.

Method 3. The Drape

1. Cut and drape lengths of streamers across a table so the ends hang down, or around the arms of a chair.

  • You can let the streamers hang loose, or secure the ends. If you secure the ends, pin or tape the streamer periodically along its length so that it drapes in a series of small, wide “U” shapes.
Method 4. The Wrap

1. Tape one end of a streamer to the end of a stair banister, or one side of the balcony railing.

2. Twist the streamer gently around the banister or railing, until you’ve loosely covered the length of the railing.

  • Don’t worry about covering the railing or banister entirely; instead, aim for a candy-cane-like “swirl” effect.
  • Tape the other end in place.
Method 5. The Flutter Effect

Tape streamers so they dangle in front of or near ceiling and window fans. When the fans are turned on, the streamers will flutter in the breeze.

  • You can also hang streamers in front of an open window–no fan–so they stand a chance of catching the real breeze.
Method 6. The Colorful Twist

1. Take two colors of streamers of choice.

2. Tape one end of each streamer to each other. Don’t tape both ends; just do one end.

3. Start twisting them together,

4. Once done, connect the other end so they don’t un-twist.

5. Hang them anywhere you’d like. For example, drape above a doorway or along the sides of a table.

Tips

  • For an interesting 2-color effect, tape the ends of 2 different-color streamers together. Use them as a single streamer for any of your decorating ideas; as you twist the streamers, they’ll give the impression of alternating colors.
  • Select a streamer color or colors that match the occasion. For example, if you’re decorating to watch a sports game or celebrate a win, choose your team’s colors; use red, white and blue streamers to decorate for the Fourth of July; orange and black for Halloween; red, green, silver and white for Christmas; and neutral tones for Thanksgiving.

Things You’ll Need

  • Streamers

  • Scissors

  • Tape

  • Thumbtacks

How to Reuse Old Clothes

Fabric is a great resource and used fabric in clothing has so many possibilities for being reused again. By saving old clothes and turning them into something else, you can keep treasured logos and images, save resources, make fantastic new things you do need and learn how to make everything you own stretch further…

In this article, you’ll get a taste of what’s possible in the way of reusing old clothes. From this point, you’ll be primed to go on to create many new ways of reusing clothing too.

1. Restyle the clothes: If the issue with your old clothes is simply that the fashion is old or you’ve grown tired of an old garment, consider restyling it. This can be done in various ways, such as adding an embellishment or alter the clothing into something different or to have a neater, more fashionable fit.

  • Make cut-off shorts out of old jeans
  • Rip your jeans to give them a completely different look.
  • Sew on a patch or iron one on.
  • Cut your jeans wider or make skinny jeans.
  • Add zippers, buttons, ribbons, or other embellishments.
  • Check out a book from the library on restyling clothes. There are many great books available on this topic now and some of the ideas in these books will be sure to appeal to you.
  • Dye the fabric to make something completely different. This may be all that’s needed to take it from last year’s fashion to this. It is even an option with colors that really date clothing, such as pastels from the 80s, especially when coupled with restyling.
  • Consider using vegetable dyes if you’re also trying to keep the reuse organic or eco-friendly in nature.

2. Make new clothes. Make something that doesn’t require a lot of fabric, such as a tube top, halter top or t-shirt. Combine fabrics for a patchwork garment.

Make a miniskirt. Cut off the top of a long t-shirt. Cut horizontally just below the sleeves. Turn the raw edge over twice to form a waistband. Insert elastic or use a ribbon as a drawstring.

3. Make fabric accessories.iron on NHL Embroidered Patches Make headbands, hair ties, bracelets, necklaces, slippers or belts. Stitch a long strip of fabric together and turn it inside out. Braid strips of fabric.

4. Make winter accessories. Make a hat, scarf and mittens from an old sweater.

5. Make patches. Add colorful patches to your blue jeans or jean miniskirt. Add an extra pocket to the inside of your coat.

6. Make toys. Make a set of doll clothes or stuffed animals. Make bean bag chairs for the kids.

7. Cover a special book. If fabric has sentimental value, use it to cover a scrapbook, journal or photo album. This way you’ll be able to continue enjoying the presence of the fabric in your life for years to come.

8. Make a picture frame.NBA wall decals Layer cardboard into the shape of a frame. Cover each piece with fabric as it’s being glued and assembled. You could also use fabric to cover over an old photo frame that is scuffed or outdated.

9. Cover a lampshade. Pleat and glue fabric onto a lampshade. Glue a row of decorative ribbon to the top and bottom of the shade to cover the raw edges of the fabric. Add a row of dangling, sparkling beads to the lower edge of the shade.

10. Cover a corkboard. Use a large piece of fabric to cover the front and sides of a corkboard. Secure the fabric in place with glue at the back of the board. Add notes, messages and mementos to the board with a stick pin or common pin.

11. Make a quilt for your bed. Add a pretty eyelet bed skirt and matching shams.

  • Old clothing fabric can also be transformed into a comfortable throw blanket.
  • Pillow cases might be another option for old fabric, provided it’s soft enough for the face.

12. Make new curtains. Make a simple valance for the top of a window. Add a small drawn curtain, to the lower part of the window, made from a different fabric.

13. Wrap small presents. Cut fabric into a circle or square with pinking shears to create a cute zig zag edge. Gather all sides of the fabric around your gift and secure it with a ribbon. This creates a beautiful package for soaps, sachet and other small items.

14. Make gift bags custom mlb stickers. Cut fabric into a long, wide strip. Fold the strip in half. Stitch the side seams. Use pinking shears to trim the top of the bag. Secure the top of the bag with a ribbon. This creates a beautiful package for a bottle of wine or a bouquet of flowers.

15. Make a big, cozy cushion for your dog. Use fabric from flannel shirts or other soft fabrics and stuff the cushion with scrap fabric. Make sure the size fits your dog!

16. Make a rag rug. You can weave a rag rug or crochet a rag rug, or braid a rag rug.

17. Make a chenille denim blanket from old denim and flannel.

18. Use fabric for cleaning. Make plenty of dust cloths or polishing rags.

  • The edges of the fabric do not need to be finished. Cut frayed edges as needed.

Tips

  • Donate them to someone who needs them.
  • Store similar fabrics together for quick access.
  • Use buttons for decorative effect.
  • Someone else may want to know how you made your new items.
  • Try it on to see if every thing fits together and if not find the right fabric and pattern to fix it.
  • Search wikiHow to find more fabric projects. NFL logo iron on transfers
  • Be sure a gift isn’t made from a piece of clothing that someone once gave to you as a gift.
  • Make rag paper. Once, rags and scrap fabric were carefully collected to make paper.

Warnings

  • Do not cover a lamp shade with flammable fabric unless you use a low wattage bulb, CFL or other cooler bulb. Heat rises and can scorch the fabric or set it on fire.

Things You’ll Need

  • Old clothes

  • Scissors

  • Work space

How to Make a Basketball Pillow

Method 1. Making the Pillow

1. Find orange fabric suitable for turning into a cushion. The fabric should be soft and durable, so that it can take been sat on, slept on and generally used for staying comfortable. Good fabrics include strong cottons, fleeces and corduroy.

  • The type of fabric used will also determine how easy it is to make the basketball markings; if you want to draw on the markings, choose a plain, smooth fabric. If you don’t mind sewing on the markings, a thicker, fleecier style of fabric can be used.

2. Cut the fabric into a circle. Make the circle as large as you like, taking into consideration the usual size of pillows. Add a one and a half-inch seam allowance on all sides.

3. With right sides together, pin three sides of the pillow together. glitter iron on stickers

4. Stitch most the way around the pillow but leave open a reasonable area for stuffing. Leave a half-inch seam allowance.

5. Turn the pillow right side out and iron it flat.

6. Prepare the opening. Tuck a half-inch of fabric inside the pillow and iron it flat.

7. Stuff the pillow. Store-bought cotton filler works best, but anything from down feathers to scrap fabric can be used. Improvise.

8. Stitch the opening together with tiny whip stitches. This part of the pillow is now complete.

Method 2. Adding the Basketball Markings iron on transfers for t shirts

1. Use a marker to add the markings to the cushion. Simply draw the typical basketball lines into place across the pillow, using fabric markers. Let the marker dry before using.

2. Stitch on the markings. This is slightly more work but looks better and will probably last longer. There are two methods––you could embroider the markings on but this should only be done where the embroidery will show clearly, and thus won’t work on fleecier fabrics. Or, you can cut out strips of black fabric and stitch them into place to form the basketball markings.

Tips

  • Crayola fabric markers are the best type of marker to use because they don’t fade.

Things You’ll Need

  • Orange fabric

  • Scissors

  • Thread, needle or sewing machine

  • Stuffing

  • Black fabric marker or black embroidery thread or black fabric scraps