Funny Flag Football Team Names iron on transfers for t shirts

lag Football Team Names iron on transfers

Don’t be left on the sideline with a boring or corny team name. Step out onto the field with a team name iron on transfers that will have the competitors remembering you for seasons to come. Whether you’re looking for the best team name or something funny that everyone can joke around with, we got you covered with a variety of choices. Check out our list of Funny Flag Football Team Names iron on transfers for t shirts inspirations and ideas. And why not go for two and let us know what your favorite team name is in the comments below!

Funny Flag Football Team Names

Show me them TDs
Sack Lunch
Flaggin’ Ball Z
Any Given Sunday
4th and long shot
3rd down for what
No Punt Intended

Funny Co-ed Flag Football Team Names

Balls and Dolls
Back that Pass Up
We Touchdown There
The Fighting Pickles
The Fun Bunch
Injured Reserved
The Tight Ends

Funny Flag Football Team Names for Men

Balls Deep
Past our Primetime
Scared Hitless
1st and Swole
Hitches Be Crazy!
Deez Nuts

Funny Flag Football Team Names for Women

Victorious Secrets
Powder Puffin
Racks and Sacks
Vicious and Delicious
Pitch Perfect
Always Open
Orange is the New Black

Want to see how these team names would look on a custom jersey, t-shirt, or sweatshirt? Check out our football jerseys, powder puff t-shirts, football sweatshirts page for a fun and easy way to get started!

5 Steps To Safely Buy Apparel From Bangladesh Suppliers

Bangladesh is the 2nd largest apparel & textiles exporter in the world, second to China. And the trend is growing, mainly because of how cheap the wages are in Bangladesh. Another trend that got the big western brands moving away their main production facilities to Bangladesh is the commitment to quality. Bangladesh government and the BGMEA (Bangladesh Garments Manufacturers & Exporters Association) have been investing heavily since 2007 to compete with quality and cost at the same time ( tee shirt iron on transfer).

Here are 5 steps that will save you time and money by making sure you get the right product with the right quality:

1. Find Authentic Suppliers

This is probably the toughest part. Your options are limited to trade fairs, online directories or hiring a specialist agency that takes care of this part. Which ever you go for, it is important to verify the identity and the credentials of the suppliers.

2. Clearly Define Expectations

This includes quality and testing metrics, production lead time, worker & workplace ethics, shipment date, payment terms and as much detailed as you can possibly get. This will help you make your case if incase something goes wrong. These expectations should be well documented before transactions begin (canada iron on transfer).

3. Making Sure Terms Are Being Followed

It’s not always possible to go and monitor the factories by yourself or your team. A trusted supplier wouldn’t normally need monitoring. However, if you’re working with a supplier for the first time, it’s best to set perimeters. One such way is to hire 3rd party inspectors such as Asia Inspection to make sure the agreed expectations are being met. More than just quality.

4. Negotiate Sensible Payment Terms

If you’re working on T/T (telegraphic transfer), basically wire transfers, the industry standard term are 30% to 50% payment has to be made on advance to cover material and accessories cost because these are bought from either international or local suppliers by the factory. Keep the advance payment % as low as possible to minimize your risk.

If you’re working on L/C (letter of credit), usually used for large orders, the bank will make sure that the supplier ships your products because the supplier would have to submit the bill of lading to the bank in order to withdraw their payment.

5. Formalize & Documentize Everything

Have a contract with your supplier before you get into business. This contract should clearly state all previous 4 points and additional clauses that your brand / organization may require such as liability, intellectual property rights to your designs, consequences if terms are not met etc.

How to Reattach Plastic Lettering to a Jersey

So you’ve got a team jersey that needs some TLC? Are those great looking plasticized letters starting to curl up and peel off? Not a problem. Keep reading for instructions on how you can re-attach them neatly and easily.

1. Launder the jersey on gentle cycle to remove any debris. Allow it to dry. Turn your jersey inside out when laundering it to avoid additional loosening of the lettering.custom NHL lettering

2. Lay the jersey on the ironing board with numbers smoothed out.

3. Set your iron to the hottest setting and turn the steam feature off.

4. Position the number carefully, and place the edge of a sheet of plain paper over it.

5. Press the edge (not the whole bottom!) of the iron to the edge of the letter.

  • Notes:
    • Place the edge of the paper even with the edge of the plastic number so that you can see what you are doing more easily.
    • Use only the edge of the iron, not the entire flat surface. The object is to seal the two layers of plastic to each other along their edges. Using the entire flat part of the iron will place too much heat over too much surface area at once.
    • You will need to experiment with heat, time, and pressure applied to find the best combination. Start with very short pressing time… almost a “tap” and gradually increase it until you come to a (few seconds) time period which will adhere the plastic layers without melting them so much that they stick to the paper.

6. Gently press down and slide the edge of the iron slowly along the edge of the paper.

  • You do not want the iron to actually touch the plastic, as this will melt the plastic and leave ugly goo on your iron. See “Tips” below.

7. Continue until every edge is tacked back down into place.

8. Leave the jersey on the ironing board until everything has cooled down.

9. Pat yourself on the back and prepare for your kid to say “Hey! You fixed it! Thanks!”

Tips

  • Keep the paper between the plastic and your iron to prevent the melted plastic sticking to the iron. The object is to melt the plastic layers together, not melt the plastic to the iron.
  • Waxed paper can be substituted for regular paper, but will leave a wax residue which must then be cleaned off the iron and lettering.
  • You do not want the iron to actually touch the plastic, as this will melt the plastic and leave ugly goo on your iron.
  • If you don’t want to risk further damaging your garment, lots of small sporting goods stores have an iron specially made for adhering numbers to fabric. They can repair your jersey most of the time free of charge.

Warnings

  • This process is specifically for heat transfer lettering and will not work on silk-screened or sublimated designs. Attempting these steps on such a garment may further damage your product.
  • Irons can get very hot. Handle with appropriate care.

How to Remove Stickers from a Laptop-popdecal.com

Did you just buy a new laptop or other device, only to find it covered in unattractive stickers?. Time to remove those stickers and free your hardware from its role as a traveling advertisement.

1. Make sure this laptop isn’t too old. The stickers will dry up, and over time, the glue backing will separate from the printed material. If you decide to remove the stickers, do it quickly. The stickers are not going to stay fresh for more than a year or two, depending upon its quality. If your laptop is a relic, skip to the very last step to use a chemical removal method.

2. Decide which stickers to remove. Some stickers are useful, such as OEM licensing stickers that will be void when removed. Others may contain serial numbers, service tags, support information, or systems specifications. Commonly removed stickers include ones promoting the Windows operating system (ie: “Designed for Windows XP” and “Windows Vista Capable”), as well as Intel and AMD CPU stickers.nhl stickers

3. Remember to do this slowly. If you rush it and try to pull the whole thing off at once, you run the risk of tearing the sticker or separating the glue backing.

4. Start from the edges. Use your fingernails or a non-abrasive abrasive putty knife. Be careful not to scratch or damage any plastic or aluminum surfaces in the process.

5. Pull the sticker up slowly from the edge you just started. Try to pull it up using an angle between 45 and 90 degrees. Never bend the sticker back further than a 90 degree angle, as this will promote the separation of the glue backing and printed material.

6. Clean the surface. Some sticker residue may be rubbed off easily, while some require additional help. As always, avoid scratching the surface.

First, try rubbing off the remaining residue by hand. Many forms of glue, even when mixed with a little paper, will curl up onto itself when moved over a surface.

Second, if rubbing doesn’t help, try using duct tape or other very sticky tape to remove the remaining residue. Break or cut off a piece of tape, apply it to the surface, then remove it or, if possible, simply rub the sticky surface of the tape over the residue. Repeat this until all of the residue has been removed, and attached to the tape instead.

Third, apply a small amount of cooking oil, such as canola or olive oils to the adhesive with a paper towel. Allow the oil to sit on the adhesive for site 2-5 minutes. The adhesive should now easily scrape off with your finger or a soft plastic tool. Using window cleaner, such as Windex, and a clean paper towel clean the remaining oil and adhesive off.

Fourth, if all previous attempts fail, use chemicals. A popular and extremely useful method is to use a citric-acid based cleaner such as “Goo-Gone”. These types of cleaners will not harm metal or harder plastics, but may dry the surface of softer plastics, leaving a white, frosted appearance. Test this on a small, hidden area first. Another liquid to try is alcohol (try spraying a small amount of your deodorant or perfume, if that is handy). Aerosol furniture polish, like Old English, can be very effective. Another is WD-40 which won’t hurt the surface and can be cleaned off the computer’s surface with a dish rag and a little soap.

7. A product called “Odor Assassin” (Lemon-Lime Scent) that is available at most “dollar” and discount stores will dissolve most adhesives instantly and can be removed with a clean cotton face cloth.

Tips

  • If your laptop sticker has one or more rounded corners, start peeling it from a rounded corner. If you come to an area where it starts to separate, start over from another edge.
  • Patience conquers all stickers. Always go slow and steady on sticker removal. If it’s not working and you’re getting frustrated, leave it for another day when you have more patience.
  • Try to use tools that won’t damage your laptop. Your fingernails, erasers, plastic putty knives, plastic guitar picks, no-stick spatula/pancake flipper, and even tweezers (used carefully) will pose the smallest threat to your laptop’s surfaces.

Warnings

  • Heat from a laptop increases the bond of some glue backings over time. This bond may etch into painted surfaces or even stain some plastics and brushed aluminum.
  • Don’t remove any stickers with OEM license information, as it will void some OEM licenses.
  • Sharp or hard objects will damage laptop surfaces if used to scrape off stickers. car art stickers
  • Avoid spilling any liquid into the cracks or exposed area of a laptop, such as the keyboard. Some liquid is conductive and may cause electrical shorts.
  • Before following this process, ensure that the laptop power is turned off, and unplugged from any electrical source. If possible, remove the laptop battery from the case as well.

Things You’ll Need

  • Tweezers for stickers that are difficult to start.

  • Cleaning solution such as alcohol or “Goo-Gone”.

  • Paper towels, napkins, or rags to use with the cleaning solution.

  • Tape, such as duct tape, to help remove residue.

why are irononlogo.com’s window clings different?

Clear Static Clings are custom die-cut to any shape you need and printed full color. Our Clear Static Clings do not use adhesive, so they can be removed and re-used again and again, and won’t leave a mess on your windows, mirrors or glass surface, as well as plastic and baked enamel finishes.

Perfect for store front windows, car windows, mirrors and more! Add you company information, logo, contact number and adhere them to your vehicle when you are working. Remove the static cling when you are not working, and reapply again later for fast, easy branding of your personal vehicle. Apply Clear Static Clings to mirrors in change rooms, bathrooms or in your salon to promote short-terms events or sales. Give Clear Static Clings away to members of your club, community, or school as fundraiser materials or to show your support for a cause. For a flexible, adhesive-free solution, Irononlogo.com’s Clear Static Clings are a great choice.

New! Hockey Puck Labels on TeeTransfers.com

Hockey season is fast approaching, and to commemorate one of our favorite sports, we have added a new line of custom stickers to teetransfers.com. We call these our Hockey Puck Stickers. 

The hockey puck labels are made with our regular white vinyl material. This means they will have great colour reproduction, and a great adhesive. They are waterproof and UV resistant so you can continue to use the puck in games. The templates are pre-set to fit perfectly on a regulation size hockey puck, so all you need to do is choose from our various artwork or design your own labels.

We are sure the possibilities and creative ideas are already flowing through your head, but here are some other great ideas on what you can do with hockey puck labels:

1) Party favours. Hosting a birthday party for your hockey playing kid? These make great party favours that guests can use again and again.

2) Groomsmen gifts. Are all of your groomsmen hockey players too? Customize the pucks with each groomsman’s name and the date of your bachelor party. 

3) Team Pucks. Part of a community hockey team, or a player for the school team? You can design your team pucks with your name and mascot on them. Perfect for home games.

4) Prizes or awards. Running an awards ceremony and need a cool (yet affordable) item you can give away? Design your own puck labels specific to the awards ceremony or event and then buy a pack of blank pucks. Its fast and easy.

5) Special gift. Make a set of labels that each say something different, such as “First Game”, “First Goal”, “First Championship”, and any other firsts you may want to include. Stick these labels on the pucks from each game when that first occurred. Get the set of pucks mounted and framed and give them to your child years later. Super sentimental.

What’re iron-on-transfers.com’s decals different from others’

Make clear stickers for your next big company event, to promote your latest product, to stick around the office, stick on cars, or just for fun! If you’re in a band, make band stickers, and use them to promote your upcoming album or tour. For easy promotion, include bumper stickers, or stickers for free giveaways to fans. Use stickers to stick on free gifts for clients, for company events, to promote your latest product, or to promote sales.

With our high quality, glossy vinyl material, they will stick strong on most material, and apply smoothly. With using white ink, our clear stickers will have that extra pop to your images. You can make them just about any shape, from round stickers, to heart shaped, or have them die cut to the image. When it comes time to change your stickers, they will come off clean leaving no messy residue behind to harm your products.

How to Make a 80s Style Tee Shirt

Cut up an old tee shirt to look like you just stepped out of the 80s!

First, the Neck : Mark 2–3 inches (5.1–7.6 cm) from the neckline all around the neck, following its natural shape.iron on transfers for t shirts

With sharp scissors, follow the basic neckline shape and cut a new, larger hole, using your marks and guidelines. (Remember to cut on the outside of your marks so those don’t remain on the shirt)

Next, the Sleeves : Fold the shirt perfectly in half, matching up the sleeve stitching both on top and bottom.

Holding both sleeves together, follow the angle of the sleeve edge, cutting off 2–4 inches (5.1–10.2 cm), depending on desired sleeve length.

Finally, the details : For a short shirt, in true “Flash Dance” style, feel free to cut an additional 6–8 inches (15.2–20.3 cm) off the length of the tee OR…

Instead of making it short, create some custom fringe. Lay the shirt out perfectly flat. Cut the side of the tee up each edge, stopping where the sleeve meets the body of the tee. Biker Flames iron on decals

Then snip small 2″ cuts (about 0.5″ apart from each other) down both the front and back of each side edge. Make sure there are the same number of snips on each side.

Tie the pieces together to create a side fringe on the shirt. Now repeat on the other side.

Now ROCK ON in your totally rad custom 80s-tee-shirts

Warnings

  • Make sure not to cut too much up the shirt to the sleeve, because the shirt will rip if you do so.
  • Be careful with scissors!

Things You’ll Need

  • A ruler

  • A silver Sharpie or chalk

  • Sharp scissors

  • Your Journey album

  • An oversized shirt (especially if you do the fringe because you will be taking in the waist at least four inches)

How to Get the Sticker Remains off Valuable Products

Some products that you buy may have stickers on them which leave sticky remains that are very hard to get off. This article shows you ways to remove the remains off such products without damaging them.

Method 1. Glass

1. Soak the remains of the sticker with rubbing alcohol.

2. Use the sharp edge of a razor blade to scrape off the remains; this will not damage the glass.

3. Make sure the blade isn’t pointing directly towards the glass. It should be facing the remains and should just skim the surface of it. If it gets harder to scrape off, add warmer water.

Method 2. Wood

1. Put hot water on a sponge.

2. Dab the sponge on the the remains of the sticker on the wood.

3. Slowly peel off as you would with a sticker. It will be easier than using cold water.

4. Consider using a towel to rub it off but it depends on the wood type. If it is smooth, the towel will work better than peeling it off.

Method 3. Metal

1. Use very hot water on the remains. Let it set for about 3 minutes.custom NHL decals stickers

2. Get a towel and rub the remains off hard. The harder you rub the remains, the more effective it will be.

3. Confirm that you are doing it correctly by checking if you get small rolls of sticker.

Method 4. Plastic

1. use rubbing alcohol and do basically what you would do with glass but be more gentle.

Tips

  • WD-40 sprayed on and left to sit will melt most glues. If not, try GooGone from the dollar store or a hardware store.
  • Boiling water can be dangerous, but its more effective.custom mlb stickers

Warnings

  • All three methods can cause injury if care is not taken, so be vigilant. Keep your fingers out of the way of the razor blade.
  • Do not try using hot water on glass.
  • The glass does not class as a laptop screen. A related wikihow has been added to tell you how to clean a laptop screen.

    Things You’ll Need

    • Razor blade

    • Warm water

    • Hot water

    • Towel

How to Print Out Large Letters of the Alphabet

    One of the most classic classroom decorations is an alphabet, strategically placed so students can refer to it when working and serve as a visual reminder of what they’ve learned. You can make a large format alphabet decoration inexpensively and easily by printing out large letters using your computer and printer. There are numerous websites that offer large format letters that can be downloaded and printed, or you can design the letters yourself using word processing software. Remember you can get creative with fonts and colors to help catch your students’ interests as well.custom mlb stickers

    • Open up a blank document using word processing software on your computer. Type the first letter you wish to create in the first line of the document.

    • Highlight the letter you just typed and go up to the “Font Size” drop down menu, usually located at the top center of the document window. Select the largest font size available and click it. If the largest size available does not sufficiently enlarge the letter, you can type in a larger number into the “Font Size” drop down menu box.

    • Highlight your letter again and select the “Font” drop down menu if you wish to use a particular font for your letter. Select your desired font out of the available options.custom NHL decals stickers

    • Go to the “File” drop down menu and select “Print Preview” to see if your letter looks as you want it to. Check that it is appropriately aligned on the paper and does not overlap the boundaries of the paper size.

    • Navigate to a website if you choose not to make your own alphabet. Many sites offer large format letters for printing. Select the first letter you wish to print. Open the letter in a new browser window, or download it to your desktop and open it using the appropriate software (generally, either word processing software or a .pdf reader).

    • Select the “File” drop down menu and click the “Print” option on either your web browser or word processing software.

    • Check that there is paper loaded into your printer and that it is plugged in and communicating with your computer. Click the “Print” button in your web browser or word processing software and monitor the printer as it prints the letter out.